Heated, No Freeze Waste Hoses

Heated, No Freeze Waste Hoses
Heated, No Freeze Waste Hoses
Heated, No Freeze Waste Hoses
Heated, No Freeze Waste Hoses

Heated, No Freeze Waste Hoses

Regular price $374.88
/
Choose Length
Shipping calculated at checkout.
  • Buy direct - No middlemen 
  • Warranty - We'll double of any competitors warranty
  • USA based support in Columbus, Ohio
  • Family owned and operated

You demanded a solution, we delivered again!

Introducing the NoFreeezeWasteHose.  The world's first heated, self-regulated, insulated and reliable waste hose designed specifically for those living and working in extreme mobile environments.  

Perfect for full time RV'ers, work campers, tiny homes and industrial enough for water treatment plants.  Built with the same attention to details as our NoFreezeWaterHose, the waste hose will provide the same convenience, reliability, durability and piece-of-mind our customers demand.

Not only do we promise to deliver all the same solutions as our leading drinking water hoses, we go a step further to solve problems unique to waste/grey/black water systems.

3" diameter reinforced polyethylene hose cores.

Each hose comes stand with male cam lock fittings. Why?

Bayonet fittings are the standard fittings used with waste systems in the RV and tiny home industry.  We all know there are much better solutions and we make it easy for you for with our conversion kits. 

SPECS

HOSE CORE
Polyethylene copalymer hose reinforce with an integral polyethylene helix.

PROP 65
Warning: California Residents Cancer and Reproductive Harm www.P65Warnings.ca.gov

RATED
• Temperature (°F) -40 to 140
• Nominal ID Size (Inches/mm) Min: 1"
• Nominal OD Size (Inches/mm) Max: 4"
• Max. Working Pressure 5 to 22 PSI
• CL Bend Radius 6"

HEATER ELEMENT
Self-Regulating Heating Cable: Electrical heating cable for frost protection or temperature maintenance of instrument lines and pipe work in safe or hazardous locations.

• Industrial grade self-limiting heater
• Operates on 120 VAC normal house current
• Will not overheat or burnout
• Draws 1.5A per 25 foot hose length
• Power output is self-regulated in response to the hose temperature
• Max. Temperature 65°C (149°F)
• Minimum Installation Temperature -40°C (-40°F)
• Power Supply 110 – 120 VAC
• Temperature Classification T6 (85°C)
• Maximum Resistance of Protective Braiding 18.2 Ohm/km
• Approval Details: CENELEC, ATEX, IEC, FM, SEMKO, CSA, Lloyds Register

THERMAL INSULATION
Foam Seal Industrial PVC Foam: Engineered to provide a cost-effective solution to your most demanding sealing and cushioning requirements. This closed cell polyvinyl chloride foam can be produced with or without adhesive.

• Remains flexible at -20° C to 80° C
• Resistant to most solvents and chemicals
• Fire resistant per FMVSS 302
• Ultraviolet resistant, Seals out light, air, dust and moisture
• Cushions against vibration and noise, Does not absorb moisture
• Outer Cover – Braided Polyester Monofilament
• Durable woven covering
• Will not tear
• Good to -40° C temperatures
• Ultraviolet and fire-resistant, Does not absorb moisture

WARNING:  THIS IS AN ELECTRICAL APPLIANCE AND PROPER RESPECT AND HANDLING IS VITAL.  NEVER ATTEMPT TO CUT, SLICE OR DISASSEMBLE HOSE.  THIS IS AN ELECTRICAL APPLIANCE AND SERIOUS INJURY, OR DEATH, MAY RESULT. 

  • Use only with UL approved GFCI outlet.
  • Do not use extension cords or overload the outlet with multiple appliances.
  • Do not bury hose.
  • Do not submerge hose in water.
  • Before connecting, please flush hose to wash out any excess residue.
  • Hose will not prevent water source or post entry/exit points from freezing.
  • You may purchase our heat trace pigtails to help protect you spigot and connections points from freezing.
  • Be sure to take appropriate measures to protect your spigot from freezing such as insulating, heat trace or hot box.
  • Do not torque neck of hose when installing or uninstalling. This will cause hose to leak and void warranty.
  • For outdoor use only.
  • Always disconnect the hose when not in use.

If you have any questions please contact us.

Shipping

We ship our products using UPS ground.

Returns

Simply return within 30 days of the purchase date and we will refund 100% of your money less the shipping costs.

We will double the best warranty you can find form all heated water hose manufacturers.  Of course we will not replace any hose that has been cut or tampered with. The legitimacy of any claim of defect with be determined at our sole discretion.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Common questions about our hoses

Our electrically heated hose assembly method utilizes a 110 VAC UL rated waterproof heated circuit. The circuit is spirally wrapped around a 3/4" heavy duty, drinking water approved hose which is thermally insulated.

It makes no difference.  All of our hoses have male fittings on each end.  Female fitting with washers tend to leak, wear out or break.  Instead, we provide a female-to-female with each hose allowing you the needed flexibility and assured durability of our hose since the female fitting is the likeliest spot for breaking.

No. There is no need to monitor the hose as the self-limiting heater is pre-programmed to operate only when needed.

No. Once plugged in, there is no point in which you must turn the unit off.

No. Because the core material continuously varies its heat output all along the pipe as temperatures change, there is no need for a thermostat.

Yes. The 1996 National Electric Code (NEC) requires ground fault protection for each branch circuit supplying electrical heating equipment.

No.

Based on a 25-foot hose, roughly 2.5 kWh of electricity, or about 25¢ a day.

DO NOT alter the hose in any manner.

No. DO NOT attempt to transfer fluids other then it's specified use.  We are happy to build you a custom hose if you have a need.

No.

Yes.  We will double the best warranty you can find form all heated water hose manufacturers.  Of course we will not replace any hose that has been cut or tampered with. The legitimacy of any claim of defect with be determined at our sole discretion.

Simply return within 30 days of the purchase date and we will refund 100% of your money less the shipping costs.

Our hoses are designed so that you can attach them together to form a longer hose if needed. However, you cannot daisy chain our hoses.  For maximum performance, each hose should have a separate power source.

Yes, we can build custom-length hoses within reason depending on the length, time of season and size of order.

The power cord is 7 feet long.

Yes. If snow falls on the hose, it will eventually melt.

Yes, up to -40° C/F.

The minimum diameter for storage is 24 inches (2 feet).

The heating element in the hose is activated in temperatures near or below freezing. In these conditions, the hose should feel warmer than its surrounding environment.

No. You will need to take appropriate steps to ensure that the spigot does not freeze.  We do offer extended heat trace pigtails which extend beyond the hose to help further protect connection points.

No, it will simply prevent the water from freezing.

Reviews