Specs for Heated Waste Hose

Hose Core – Polyethylene copalymer hose reinforce with an integral polyethylene helix.

  Warning:  California Residents Cancer and Reproductive Harm  www.P65Warnings.ca.gov

 Temperature (°F)                                 -40 to 140

Nominal ID Size (Inches/mm)            Min: 1"

Nominal OD Size (Inches/mm)           Max:  4"

Max. Working Pressure                       5 to 22 PSI   

CL Bend Radius                                   6"


Heater Element –  Self-Regulating Heating Cable Electrical heating cable for frost protection or temperature maintenance of instrument lines and pipe work in safe or hazardous locations.

Industrial grade self-limiting heater

Operates on 120 VAC normal house current

Will not overheat or burnout

Draws 1.5A per 25 foot hose length

Power output is self-regulated in response to the hose temperature

Max. Temperature                               65°C (149°F)

Minimum Installation Temperature     -40°C (-40°F)

Power Supply                                      110 – 120 VAC

Temperature Classification                 T6 (85°C)

Maximum Resistance of Protective Braiding 18.2 Ohm/km

Approval Details:  CENELEC, ATEX, IEC, FM, SEMKO, CSA, Lloyds Register

Thermal Insulation – Foam Seal Industrial PVC Foam:

Engineered to provide a cost-effective solution to your most demanding sealing and cushioning requirements.  This closed cell polyvinyl chloride foam can be produced with or without adhesive. 

Remains flexible at -20° C to 80° C

Resistant to most solvents and chemicals

Fire resistant per FMVSS 302

Ultraviolet resistant, Seals out light, air, dust and moisture

Cushions against vibration and noise, Does not absorb moisture 

Outer Cover – Braided Polyester Monofilament

Durable woven covering

Will not tear

Good to -40° C temperatures

Ultraviolet and fire-resistant, Does not absorb moisture